Your cart

Neurogan hypochlorous acid spray for face, 250 ppm, fragrance-free, 2 fl oz (60 mL) bottle
Hypochlorous Acid Spray facial mist bottle beside the headline A gentle face mist, 250 ppm hypochlorous acid, 60 mL
Hypochlorous acid spray ingredient list: water, sodium chloride, hypochlorous acid, 15 mg total, 2 fl oz (60 mL)

Hypochlorous Acid Spray

A fragrance-free hypochlorous acid spray for face, 250 ppm (15 mg per 2 fl oz).

  • 250 ppm hypochlorous acid
  • 3 ingredients
  • Fragrance-free
  • Made in San Diego
What does it do?
What it is
A 2 fl oz (60 mL) face spray with three ingredients: water, sodium chloride and hypochlorous acid at 250 ppm (15 mg per bottle). No fragrance.
What it does
Refreshes skin and soothes the look of redness after cleansing, a workout, shaving or a long day. It dries on its own, so there is nothing to rinse.
How to take it
Close your eyes and spray 2 to 3 times onto clean skin, morning and night or whenever skin needs a reset. Let it dry, then continue your routine.
$19
Pack

Ships in 1–3 business days

About Hypochlorous Acid Face Spray

This hypochlorous acid face spray has 250 ppm in a three-ingredient formula: water, sodium chloride and hypochlorous acid, with no fragrance.

Spray it on clean skin, let it dry and carry on. It fits the moments skin looks flushed or feels tight, from the morning routine to the gym bag.

Four moments to reach for it When to use it

  • Morning and night

    After cleansing, before serums and moisturizer. Let it dry first so the next layer goes on dry skin.

  • After the gym

    Mist a flushed, sweaty face once you have rinsed or wiped it. No rinse needed afterwards.

  • After shaving or waxing

    Spray it on freshly shaved skin instead of a fragranced aftershave.

  • Under a mask, on a flight

    Keep the 2 oz bottle in your bag for a reset whenever skin feels tight. Eyes closed.

Full descriptionIngredients, how to use and label details

Hypochlorous Acid Spray is a fragrance-free hypochlorous acid face spray. Each 2 fl oz (60 mL) bottle holds 15 mg of hypochlorous acid at 250 ppm, in a simple formula of water, sodium chloride and hypochlorous acid. It refreshes skin and soothes the look of redness after cleansing, workouts, or a long day. Made in San Diego, California. For cosmetic use only.

Suggested Use: Spray 2 to 3 times onto clean skin, morning and night or whenever your skin needs a reset. Let it dry; no need to rinse. Keep your eyes closed while spraying, and patch test before first use.

What is in the bottle

The four things people ask before they buy a hypochlorous acid facial spray.

  1. What it is

    A molecule your body makes

    White blood cells make hypochlorous acid from chloride. This spray makes it from salt water, so the whole ingredient is water, sodium chloride and hypochlorous acid.

  2. Reading the label

    250 ppm

    A measured amount, not a slogan

    Parts per million tells you how much hypochlorous acid is in the water: 250 ppm is 15 mg in the 60 mL bottle. Face sprays sold today range from about 100 to 300 ppm.

  3. The smell

    A faint pool note that fades

    A light chlorine note comes from the hypochlorous acid itself. There is no fragrance added to cover it, and it is gone once the mist dries.

  4. Keeping it fresh

    2 oz

    A size you finish while it is fresh

    Light and heat slowly turn hypochlorous acid back into salt water. Keep the bottle out of direct sun and use it daily, and the 2 oz size is used up while it is fresh.

This is a cosmetic product.

How to use hypochlorous acid spray on your face

Spray, let it dry, carry on

Splashing a face with water at a sink01 · Clean skin

Start after cleansing

Wash your face or wipe off sweat and sunscreen. The spray works on the skin it lands on, so clean skin is the best start.

A woman with eyes closed misting her face02 · Eyes closed

Hold it a hand’s width away

Close your eyes and spray 2 to 3 times, about 15 to 30 cm from your face, so the spray settles evenly.

Fingertips pressing moisturizer onto a dewy cheek03 · Let it dry

Then the rest of your routine

Let it dry for a few seconds, then apply serum, moisturizer and sunscreen. Use it before makeup rather than over it.

Keep it out of your eyes

Close your eyes while you spray. If mist gets into your eyes, rinse with water.

With vitamin C or acids

Let the mist dry fully before other products. Use vitamin C serums at the other end of the day.

Store it cool and shaded

Keep the bottle closed, below room temperature and away from direct sunlight. Do not leave it in a hot car.

Three ingredients, nothing else

Water, salt and the molecule made from them. The full list fits in one line.

ACTIVE · 250 PPM

Hypochlorous acid

Hypochlorous Acid

The same molecule white blood cells make. 250 ppm, or 15 mg per 60 mL bottle.

Role Active ingredient
Per bottle 15 mg
On the label No. 3
The complete ingredient listAll 3 ingredients, in listed order
  1. Water Sodium Chloride Hypochlorous Acid

As listed on the product label.

Fragrance-free

No fragrance, essential oils or dyes. Every ingredient is in the list below.

Made in San Diego

Each 60 mL bottle is made in San Diego, California.

Hypochlorous acid spray: what people ask

Hypochlorous acid is the active ingredient in Neurogan Hypochlorous Acid Spray. It is dissolved in water with sodium chloride at 250 ppm, which is 15 mg per 2 fl oz (60 mL). It is for cosmetic use only.

Neurogan Hypochlorous Acid Spray is a cosmetic face mist. It refreshes skin and soothes the look of redness after cleansing, workouts, or a long day.

Spray 2 to 3 times onto clean skin, morning and night or whenever your skin needs a reset. Let it dry. There is no need to rinse. Keep your eyes closed while spraying.

Yes. This mist is made for the face. Spray 2 to 3 times onto clean skin and keep your eyes closed while spraying. Avoid contact with eyes and mouth, and patch test before first use.

Use 2 to 3 sprays morning and night, or whenever your skin needs a reset. Everyone’s skin reacts differently, so patch test first and stop using it if irritation occurs.

ppm means parts per million. 250 ppm is 0.025%. This sprary contains 15 mg of hypochlorous acid in 2 fl oz (60 mL), which is 250 ppm.

Not quite. This mist has three ingredients: water, sodium chloride and hypochlorous acid, at 250 ppm (15 mg per 2 fl oz).

No. Spray it onto clean skin and let it dry. There is no need to rinse. Keep your eyes closed while spraying.

Store it in a cool, dry place away from direct light, sunlight, heat and humidity. Keep it out of reach of children.

Have a question about the mist? Talk to our team

Keep it within reach

A fragrance-free spray for the moments skin looks flushed or feels tight.

  • 250 ppm hypochlorous acid, 15 mg per bottle
  • Water, sodium chloride and hypochlorous acid
  • Fragrance-free, made in San Diego

Compare with L-Glutathione Face Mist

Neurogan hypochlorous acid spray for face, 250 ppm, fragrance-free, 2 fl oz (60 mL) bottle
Hypochlorous Acid Facial Spray250 ppm hypochlorous acid · 60 mL (2 fl oz) · Fine-mist spray
$20$19
Ships in 1–3 business days

For external use only. Close your eyes while spraying and avoid contact with the eyes. Do not apply to broken skin. Patch test before first use and stop if irritation persists. Store below room temperature, away from direct sunlight. Keep out of reach of children.

This cosmetic product is not intended to diagnose, treat, cure or prevent any disease.